Page 365 - 4091-BOOK1

LOT 417
Uzi Submachine Gun
Combo with BG Machine
Registered Bolt, IMI
Model B Host, and AWC
Silencer, Class III/NFA
-A) BG Machine
Conversion Bolt, Class III/NFA Registered Fully Transferable Machine Gun - Serial no. 635, 45 ACP cal.,
matte black finish. Manufactured and registered prior to 1986, with the maker’s address on the left side in electric pencil and the serial number stamped on the right. The right side of the bolt is properly slotted to accommodate the obstructing rib found in semi- automatic Uzis, and the bolt face and extractor are configured for 45 ACP.
CONDITION: Excellent, with 90% of the original matte black finish, showing bright wear on the high points and contact surfaces. NOTE: This weapon is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 479.
B) IMI/Action Arms Uzi Model B Carbine - Serial no. SA55780, 45 ACP cal., 10 inch round bbl., matte black finish, metal stock. Manufactured
by IMI and imported by Action Arms as a 9mm semi-automatic carbine, this Model B has been fitted with a new barrel and magazine, open bolt trigger components, and the conversion unit in item “A”, turning it into a selective fire 45 ACP submachine gun. No permanent modifications have been made to the receiver, and both the bolt restrictor block and the barrel collar are present. Post front and two-leaf peep rear sights, with a non-ratcheting top cover, standard markings on the sides of the receiver, “A” added to the “A F S” selector markings, ribbed forearm and pistol grip, and an underfolding steel stock.
CONDITION: Very fine as upgraded and partially refinished (shortened and touched-up barrel), 95% plus matte black finish overall, with mild
wear and handling marks. The grip panels show minor scuffing. Mechanically needs adjustment, as the magazine does not fully seat in the well when the bolt is installed, otherwise in good order.
C) AWC Systems Technologies Mk9 Silencer, Class III/NFA Silencer - Serial no. 981238, 45 ACP cal., matte black finish. Threaded for compatibility with item “B”, mounting to the receiver in lieu of the barrel nut. Overall length is 12 3/4 inches, with alloy and steel construction and a combination of ported tubing and stacked baffles in the interior. With an insulated cover.
CONDITION: Excellent, 98% plus original matte black finish, with minor handling marks. NOTE: This Silencer is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 479, National Firearms Act.
Estimate: 9,500 - 16,000
LOT 418
AWA Inc./IMI UZI Bolt/Host Combo, Class III/NFA -A) AWA Inc. Conversion Bolt, Class III/NFA Fully Transferable Machine Gun - Serial no. 0016, 9 mm Luger cal., matte grey finish.
Manufactured in Louisville, Kentucky, this AWA Manufacturing Inc. full-automatic UZI conversion bolt has been installed into the host gun described in item “B” of this lot. The bolt is individually numbered and marked with the AWA Inc. address on the left side. CONDITION: Very fine, with light cycling wear. Appears to be in fine working order. NOTE: This weapon is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 479. B) IMI/Action Arms Uzi Model B Carbine, Host Gun - Serial no. SA38437, 9 mm Luger cal., 10 1/4 inch round bbl., black/grey finish, metal stock. Manufactured in Israel and imported by Action Arms of Philadelphia, Pennsylvania, the UZI Model B currently hosts the automatic conversion bolt described in item “A” of this lot. To host this conversion bolt, the bolt restrictor block was removed from the receiver, a ratchet-equipped top cover, and full automatic trigger set installed. The AWA address and serial number are marked on the left side of the bolt. The barrel restrictor collar is still installed. Features adjustable post front and peep rear sights, with the IMI/Action Arms marks on the sides of the receiver, Group’s logo on the underside, and modified “A R S” selector markings on the trigger housing. Fitted with a bayonet lug, folding stock, and ribbed pistol grip. CONDITION: Very fine, retaining 95% refinished black and grey finishes with light edge and cycling wear, and minor handling marks. The furniture is also very fine with light handling marks. Mechanically excellent. Estimate: 8,500 - 14,000
LOT 419 SWD M11/Nine Submachine Gun, Class III/NFA Fully Transferable Machine Gun - Serial no. 86-0013579, 9 mm cal., 5 1/2 inch round bbl., matte black finish, metal stock. A descendant of Ingram’s M10, the M11/Nine is made with a slightly longer receiver than the M11 to accommodate a caliber upgrade from 380 ACP to 9mm Parabellum and allow for a longer range of bolt travel to dampen felt recoil. Fixed blade and peep sights, with the “SEMI/SMG” selector switch on the left side of the frame, safety switch next to the trigger guard and standard markings on the right side of the frame. A swiveling nylon strap is installed on the barrel behind the threading, with a contoured grip with the Cobray logo on the back and a collapsing wire stock. CONDITION: Excellent, with 98% of the original matte black phosphate finish, showing minor handling marks and edge wear overall. The retainer for the front receiver pin is absent, and the pushbutton stock catch has been replaced with a Lage-style hex screw assembly. Mechanically excellent. NOTE: This weapon is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 479.
Estimate: 6,500 - 9,500 363