Page 402 - 4092-BOOK1-FLIPBOOK
P. 402
400
Included with the guns are two sets of nickel snap caps and a total of eight assorted spare Teague thin wall choke tubes. Barrel and stock measurements (U/O): bore diameter nine inches from the breech both proofed at 18.5mm (.728 inches) and measured .729/.732 inches; Teague thin wall chokes (modified/full installed); minimum wall thickness .023/.024 inches; 1 1/2 inch drop at comb; 2 3/16 inch drop at heel; 15 7/8 inch length of pull; cast- off; weight 7 lbs. 10 oz.
CONDITION: Excellent overall, retaining 98% original blue finish with only some slight loss on the triggerguard/lower tang,
95% original casehardened finish with a few patches of slight
muting, a scratch on the left of the upper barrel, and a few minor handling marks. The wood is very fine with a few scratches,
a few pressure marks, and sharp checkering. Mechanically excellent. B) J. Purdey & Sons Shotgun - Serial no. 29344, 12 gauge, 28 inch partial rib bbl., blue/casehardened finish, walnut stock. As described in “A”. Barrel and stock measurements (U/O): bore diameter nine inches from the breech both proofed and measured at 18.5mm (.728 inches); Teague thin wall chokes (full/ modified installed); minimum wall thickness .025/.025 inches;
1 1/2 inch drop at comb; 2 3/8 inch drop at heel; 15 13/16 inch length of pull; cast-off; weight 7 lbs. 11 oz.