Page 387 - 87-BOOK2

LOT 1562
Exceptional Mythological Themed Relief Engraved Connecticut Shotgun Manufacturing Co. .410 Bore Christian Hunter
Double Barrel Shotgun - Serial no. SD000224, 410 gauge, 28 inch solid rib bbl., blue/coin finish,
walnut stock. Blued steel barrels with single brass
bead sight on the smooth concave solid rib which shows a small
flourish of scroll at the breech, 2 inch wedges of scroll at either breech, 3 inch chambers with
ejectors, and chokes measured full/full. The coin finished sideplated boxlock action displays exceptional mythological theme extensive deep relief engraved themes over a darkened matted background. The left side of the action and sideplate show four mythical beasts battling one another with the right side a mirror image of the same, each fence shows a fork tongued snake bust, the top lever displays a devilish mask, the triggerguard has a dragon figure, the lower tang shows small rodent and lizard scenes, and the underside shows a pair of beasts below a large devilish mask. The work is unsigned; however, the consignor states that the work was done by Master Engraver
Richard Roy of Connecticut. The gun features a single selective trigger and a tang mounted automatic safety switch. Beautifully figured,
multi-point checkered beavertail forend with engraved fittings and reading “CHRISTIAN HUNTER” in relief lettering and a straight
grip stock with teardrop carved flats, blank gold inscription oval, and checkered bare butt. Stock measurements: 1 3/8 inch drop at comb; 2 1/4 inch drop at heel; 14 1/2 inch length of pull; weight 5 lbs. 3 oz. CONDITION: Excellent overall, retaining 99% original blue and coin finishes with limited handling evidence and sharp checkering on the stock and forend. Mechanically excellent. Estimate: 8,000 - 11,000
LOT 1563
Attractive Elaborately Engraved Ben Shostle Signed Custom Bowie Knife with Case - This beautifully engraved Bowie knife is by Ben Shostle, a renowned member of the Knife Makers Guild, Firearms Engravers Guild of America and American Custom Gun Makers Guild. It measures 14 1/4 inches overall with a 8 7/8 inch shallow clip point blade. The left ricasso is discreetly marked “SHOSTLE”. Both sides of the blade are extensively masterfully engraved with floral scroll and a dark stippled background, roped borders, and an American eagle and shield on the left. The engraving continues on the spine of the blade, on the simple elliptical guard, and the pommel. The grip appears to be smooth ebony and is octagonal in shape, with a slight swell towards the middle. Includes a custom hardwood case that is fitted for the knife. CONDITION: Near mint, the blade almost entirely bright with a few scattered very light handling marks and a couple tiny flecks of spotting near the edge. The hilt is equally excellent, the steel bright and only the slightest handling marks on the grip. The case is very good with some scattered minor exterior dings and scratches. Estimate: 1,800 - 2,750
385