Page 194 - 86-Book2

The Last Surviving Example of the DL-44 Heavy Blaster used by Han Solo in "Star Wars: Episode IV - A New Hope"
192
Initially two pistols were prepared and as filming progressed a third was created as production requirements increased. There was only ever one genuine scope and mount which was transferred to which ever pistol was in closeup. Dummy scopes and mounts were used when required. All three C96 pistols were taken from Bapty & Co. stock and, being hand crafted, had minor differences and marks, the details of which are now lost in time.
Now what became of all this after filming. Due to restrictive firearms laws in the UK, the guns were stripped back to their original condition with added lugs cut off, barrel extensions (blank firing only) or moderators added and refinished for use in future films. The importance of ‘Star Wars’ or these items used in the film not being recognised at the time.
Fast forward to 2010, and after constant badgering from myself, Carl Schmidt proudly came to me with the original Hensoldt-Wetzlar ‘Ziel Dialyt 3x’ scope he had found in one of the multitude of Bapty & Co. oddments boxes. Then in 2018 he made my year by discovering the remains of the original scope mount in the bottom of one of his parts chests. Sadly it was only the upper two-thirds of the mount as the base had been cut off sometime in the intervening years. Now my attention was spent in looking at our remaining stock of C96 Mauser pistols. Many had been lost in a government hand-in scheme in 1997 but we still possessed five much worn and abused complete C96 pistols. Four had their original length barrels but one, serial number 299415, had
a re-lengthened barrel and faint witness marks on the side which had been linnished and re-coloured. This was undoubtably one of the three original guns used on the 1977 ‘Star Wars’ set and the only one to survive.
Now for my own personal satisfaction I asked Carl, although retired, if
he was prepared to return to Bapty and rebuild what he had helped create all those years earlier and he agreed but with the proviso that
he would only re-assemble the parts we had in the spirit of how they were originally put together. A flash hider was taken from our MG81 spares box, given their rarity feasibly the same one as used in 1977, and he got to work. The base of the scope mount in 1977 was possibly a complicated slide on dovetail but it was decided not to try and replicate that as the exact detail has been forgotten and just create speculation amongst ‘Stars Wars’ enthusiasts. Also the gizmos and small pieces glued on by the Art Department to make the C96 look suitably futuristic have not been replaced, even though replica parts are available, for the sake of purity. Whilst not being in the exact form seen by millions in the film, the end result contains 80% of the last remaining pieces of this iconic prop.”
The pistol itself shows many of the original markings of the Mauser
C96 pistol which it is based upon, including the the partial two-line Waffenfabrik Mauser address visible on either side of the rear scope base lug, a “crown/gothic letter” proof on the right of the chamber, and the partial serial number, “9415”, over “crown/crown/U” proof on the left of the chamber. The full serial number “299415” is marked twice on the rear, and “212” can be seen very faintly on the rear of the hammer. It retains the original rear tangent sight graduated from 50-1000. It has been fitted with a sleeve over the original barrel to create a more substantial profile and has been setup to fire 9mm blanks with a threaded lug, numbered “415” to the gun, for attachment of the MG81 flash hider which is held in place by a set screw on the bottom. The lower scope base is marked “ZF 2602ii” on the interior and has a serrated set screw retaining the upper portion of the the base/rings. The scope is marked “HENSOLDT WETZLAR/ ZIEL DIALYT 3x” on the right of the tube and “976l” on the right of the adjustment dial base. The adjustment dial is graduated 1-10 on top. The left side of the scope tube is marked “GW.No.2602ii”, with the “ii” obscured by the front scope ring. The serrated grips are both stamped “280” internally. As stated in the letter from Tony Watts, the pistol lacks many of the small “greeble” details that were attached later for filming, and have likely been lost to time. Also includes a BATFE letter stating, “Based on
the provided information, it appears the submitted pistol was modified for use as a prop in the 1977 film ‘Star Wars’ by Harrison Ford’s character Han Solo. The submitted Mauser C96 pistol derives a substantial part
of its monetary value from its connection to the ‘Star Wars’ film” and approved it for importation by a licensed importer.” Includes a Han Solo photograph signed by Harrison Ford.
There has been as much endless speculation regarding the configuration, whereabouts, and condition of the original three DL-44 heavy blasters used in the promotion and filming of “Star Wars: Episode IV - A New Hope” as there has been about whether “Han shot first” (he did), with this being the only surviving example this is an opportunity you don’t want to miss!
CONDITION: Arguably the most iconic movie firearm of all time, it remains in fine overall condition and is converted to a non firing for blanks only. Do not miss this opportunity to own the only surviving example of the DL-44 Heavy Blaster used by Han Solo in “Star Wars: Episode IV - A New Hope”, because we all know... Hokey religions and ancient weapons are no match for a good blaster at your side, kid. Provenance: Bapty & Co. London.
Estimate: 300,000 - 500,000