Page 265 - 4091-BOOK3

OT 3455
CB Uzi Conversion Bolt with an IMI/Action Arms Uzi Model B Host and AWC Silencer, Class III/NFA -A) JCB Conversion Bolt, Class III/NFA Fully Transferable Machine Gun - Serial no. JCB001, 9 mm cal., black finish. Manufactured
and registered in Portland, Oregon prior to the 1986 cutoff, this Uzi bolt is configured for compatibility with commercial semi-auto receivers, properly slotted on the right side to pass the restrictor block, with serial number and address engraved on top.
CONDITION: Excellent, with 90% original matte black finish, showing bright high point and cycling wear. NOTE: This weapon is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 479. B) IMI/Action Arms Uzi Model B Carbine - Serial no. SA50574, 9 mm cal., 9 1/4 inch round bbl., black finish, metal stock. Manufactured in Israel and imported by Action Arms of Philadelphia, Pennsylvania as a semi-automatic carbine, this Uzi Model B has been outfitted as a selective fire machine gun via installation of the registered conversion bolt described as Item A. No permanent modification were made
to the receiver; the bolt restrictor block and barrel collar are untouched. Post front and two-leaf peep rear sights, with a non-ratcheting top cover, “A F S” marked trigger housing with proper open bolt components, knurled barrel nut, standard receiver markings, a set of ribbed forearm and grip panels, and an underfolding stock.
CONDITION: Very fine as upgraded to full automatic, with 95% of the black finish, showing mild wear and handling marks overall, as well as some dents on the sight wings. The panels show a few minor scratches and scuffs. Mechanically excellent. C) AWC Systems Mk9 Silencer, Class III/NFA Silencer - Serial no. 990176, 9 mm cal., matte black finish. Threaded to match the barrel currently installed in the host gun (Item B), 12 1/2 inches overall, with alloy and steel construction, internally configured with a ported expansion chamber and baffle stack. With an insulated cover.
CONDITION: Excellent, with 98% original matte black finish, showing some light handling marks overall.NOTE: This Silencer is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 479, National Firearms Act.
Estimate: 9,500 - 16,000
L
J
LOT 3456
SWD Conversion Bolt and IMI/Fleming “Mini Uzi” Host Combo, Class III/NFA -
A) SWD “UB” Uzi Conversion Bolt, Class III/NFA Fully Transferable Machine Gun - Serial
no. UB8616, 9 mm cal., matte black finish. Measuring 4 1/2 inches long (inclusive of firing pin
assembly, sans recoil spring unit), this conversion bolt is designed for use with closed-bolt Uzis without
a bolt restrictor block. The SWD address and serial number are engraved on the left side, with a functional
moving firing pin and safety block permitting function in both full and semi-auto modes, as well as a recoil spring and
buffer assembly.
CONDITION: Very good, with minor wear and handling marks. The buffer shows a number of scuffs and scrapes. Mechanically in
good order. NOTE: This weapon is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 479.
B) IMI/Fleming Firearms “Mini Uzi SMG” Host Gun - Serial no. MC02416, 9 mm cal., 7 inch round bbl., matte black finish, metal stock. Originally manufactured by IMI and imported by Action Arms, this Uzi has been converted to act as the host for the conversion bolt described in “A”. Fleming’s address has been added to the underside around the Action Arms markings with a shortened barrel; the breech restrictor ring is present and untouched. Post front and two-leaf peep rear sights, with a ratcheting top cover, three position “A R S” selector unit, ribbed forearm and pistol grip, and a side folding buttstock.
CONDITION: Very fine as reconfigured/upgraded, with 95% plus factory quality matte black finish, showing some scuffing and covered pitting around the rear of the receiver, and mild handling marks. The ratchet safety has been disabled, otherwise mechanically excellent. Estimate: 9,500 - 16,000
LOT 3457
SWD M11/Nine Submachine Gun, Class III/NFA Fully Transferable Machine Gun - Serial no. 86-0013580, 9 mm cal., 5 1/2 inch round bbl., matte black finish, metal stock. A descendant of Ingram’s M10, the M11/Nine is made with a slightly longer receiver than the M11 to accommodate a caliber upgrade from 380 ACP to 9mm Parabellum and allow for a longer range of bolt travel to dampen
felt recoil. Fixed blade and peep sights, with the “SEMI/SMG” selector switch on the left side of the frame, safety switch next to the trigger guard and standard markings on the right side of the frame. A swiveling nylon grip strap is installed on the barrel behind the threading, with a Lage wrap-around grip with thumb magazine release added to the magazine well and a wire stock with a fixed locking block. Also included with the lot is an extra magazine and a Lage side-folding buttstock.
CONDITION: Excellent, with 97% plus of the original matte black finish, showing some light handling marks. Some aftermarket components installed, and the pin lock is absent. The grips and spare stock are excellent, the wire stock is very good with mild wear and handling. Mechanically excellent. NOTE: This weapon is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 479.
Estimate: 6,500 - 8,500
263