Page 370 - 4094-BOOK1
P. 370
368
LOT 456
Desirable Mauser Model 1878 “Zig-Zag”
Single Action Revolver with Checkered Walnut Grips -
Serial no. 719, 9 mm cal., 5 1/2 inch solid rib bbl., blue finish,
walnut grips. Developed in 1878, the Zig-Zag revolver was the first handgun
designed and developed by Paul Mauser and his firm, while still operating in partnership with Wilhelm Mauser as the
Mauser Brothers (prior to 1884). A competitor to be the first centerfire cartridge-fed handgun adopted by the German
military, the 1878 scored high marks in overall performance, though concerns about the complexity of the design led
them to choose the 1879 Reichsrevolver instead. A number are believed to have seen service as privately purchased military
sidearms, though. At the heart of the mechanism is the combination of an angular track (the titular ‘Zig-Zag’) machined into the
side of the cylinder and a toothed reciprocating bar linked to the hammer, which serves to both advance and lock the cylinder, in
contrast to the more commonly seen pawl/sprocket and stop arrangement. Additionally, the spring responsible for resetting the cocking bar also
powers the hammer, replacing the grip frame mounted leaf spring commonly seen in that era. For loading, the barrel assembly is hinged at the rear of the top
strap, automatically pushing the hammer back to the safety notch when opened, with the closure latch doubling as the lever for a star-pattern extractor assembly. Sights are fixed, with “GEBR. MAUSER & Cie
OBERNDORF a/N. WURTTEMBERG.1878.PATENT.” on top of the barrel rib, no externally visible proofmarks, and matching numbers on the frame and cylinder. With a pair of checkered hardwood grips, with “CH”
hand marked inside the panels and “WM” on the frontstrap.
CONDITION: Very fine, with 80% of the original blue finish, showing a number of light scratches and dings, edge wear, and minor spotting. Bright case color is present on the frame, with the barrel latch
turning silver, and 50% of the original niter blue finish is present on the small parts and cylinder, the latter showing a mixed plum and copper tone patina. The frame is dented on the left side underneath the
grip panel, but the dent does not interfere with grip fit or mechanical function. The grips are very good, with some dings on the sharp checkering. Mechanically excellent.
Estimate: 5,500 - 7,500
LOT 457
Desirable Mauser Model 1878 “Zig-Zag”
Single Action Revolver with Finely Decorated Hard Rubber
Grips - Serial no. 135, 9 mm cal., 5 1/4 inch round bbl., blue finish,
hard rubber grips. Developed in 1878, the Zig-Zag revolver was the first handgun
designed and developed by Paul Mauser and his firm, while still operating in partnership with Wilhelm Mauser as the
Mauser Brothers (prior to 1884). A competitor to be the first centerfire cartridge-fed handgun adopted by the German
military, the 1878 scored high marks in overall performance, though concerns about the complexity of the design led them
to choose the 1879 Reichsrevolver instead. A number are believed to have seen service as privately purchased military sidearms,
though. At the heart of the mechanism is the combination of an angular track (the titular ‘Zig-Zag’) machined into the side of the
cylinder and a toothed reciprocating bar linked to the hammer, which serves to both advance and lock the cylinder, in contrast to the
more commonly seen pawl/sprocket and stop arrangement. Additionally, the spring responsible for resetting the cocking bar also powers the hammer,
replacing the grip frame mounted leaf spring commonly seen in that era. For loading, the barrel assembly is hinged at the rear of the top strap, automatically
pushing the hammer back to the safety notch when opened, with the closure latch doubling as the lever for a star-pattern extractor assembly. Sights are fixed, with “GEBR. MAUSER & Cie OBERNDORF a/N.
WURTTEMBERG.1878.PATENT.” on top of the barrel rib, “crown/crown/U” on the left side of the barrel shroud, and matching partial serial number “35” on multiple components. With a pair of finely decorated
hard rubber grip panels with scenes of a swan fighting a dragon among scroll accents.
CONDITION: Excellent, with 95% of the original blue finish, showing scattered light dings and scratches, edge wear, and mild spotting concentrated on the muzzle. The casehardened components are fading,
but still retain 70% intact, with 75% plus niter blue on the cylinder, safety and side lever. The grips are very fine, with minimal wear and sharp detail in the decorations. Mechanically excellent.
Estimate: 6,500 - 9,500