Page 324 - 4094-BOOK3

LOT 3504
Factory Master Morena Terri Signed and Engraved Perazzi High
Tech L Over/Under Shotgun Two Barrel Set with Case - Serial no. 161515, 12 gauge, 31 1/2 inch vent
rib bbl., blue/coin finish, walnut stock. Perazzi guns are among the finest sporting arms one can buy, with clean lines and
fantastic handling they truly are a joy to hold and shoot. Built with blued steel barrels featuring dual bead sights on the
matted raised adjustable vent rib, standard factory markings, 2019 dated Italian proof marks on and ahead of the flats, interchangeable chokes
(“4”/”8” installed), and 3 inch chambers with automatic ejectors; the barrel serial number is “161516”, one digit up from the number on the action. The
barrels are fitted to the coin finished triggerplate action which displays attractive scroll engraving around bouquets of blossoms and vines on the left, right, and
underside, as well as a floral pierced toplever. The engraving is signed “Terri” to the right of the triggerplate for Perazzi factory Master Engraver Morena Terri. The gun
features a single gold trigger and a tang mounted manual safety. The gun is fitted with a gorgeous highly figured and multi-point checkered beavertail forend as well as
a pistol grip stock with right hand palm swell, adjustable comb, and a factory black rubber recoil pad. Included with the gun is a matching 34 inch unsingle barrel with a
3 inch chamber and a fixed full choke. Also included is a factory takedown case that houses the entire set, extra springs and firing pins, and extra five extra chokes (“5”, “6”, “7”, “9”, and “10”). Barrel and stock measurements for
the unsingle barrel: bore diameter nine inches from the breech proofed and measured at 18.7mm (.736 inches); choke constriction .031 inches; minimum wall thickness .055 inches. Barrel and stock measurements (U/O): bore
diameter nine inches from the breech both proofed and measured at 18.7mm (.736 inches); minimum wall thickness .035/.034 inches; 1 1/2 inch drop at comb; 2 1/2 inch drop at heel; 15 inch length of pull; weight 9 lbs. 4 oz.
CONDITION: Excellent overall, retaining 99% original blue and coin finishes with minor handling evidence and sharp checkering on the stock and forend. Mechanically excellent. The extra unsingle barrel is also excellent.
Estimate: 12,000 - 18,000
LOT 3505
Factory Engraved Krieghoff K-80 Over/Under Shotgun with Two Extra Barrels, Barrel
Inserts, and Cases - Serial no. 070336, 12 gauge, 30 inch vent rib bbl., blue/silver nitride finish,
walnut stock. Built with blued steel barrels featuring dual bead sights on the matted flat vent rib, 2007 dated German
proof marks, chokes marked skeet/skeet, and 3 inch chambers with automatic ejectors. This barrel appears to act as
a carrier set for the included sub gauge barrel inserts (see below). The barrels are fitted to the silver nitride finished action which displays
Krieghoff “Standard” scroll pattern consisting of attractive border scroll with a diamond of scroll on either side and scrollwork surrounding a shield
reading “K-80/KRIEGHOFF/GERMANY” on the underside. The gun features a single selective trigger and a tang mounted safety (which has been disabled). The gun
is fitted with an attractively figured and multi-point checkered forend with engraved forend iron as well as a pistol grip stock with right hand palm swell, adjustable
comb, and Kick-Eez recoil pad. Included with the gun are two extra barrels, one 34 inch unsingle barrel ported with tapered step rib with 2 3/4” chambers and added
interchangeable chokes (“4” installed), as well as a 32 inch over/under barrel set, ported with tapered step rib, interchangeable chokes (modified/improved modified installed), and 2 3/4 inch chambers. Also included are
three full length subguage barrel insert sets in 20 gauge, 28 gauge, and .410 bore all with interchangeable chokes, skeet chokes for each of the inserts, 13 extra 12 gauge chokes, cleaning/maintenance tools, and two
aluminum takedown cases that house the entire set. Barrel measurements for the unsingle barrel: bore diameter nine inches from the breech proofed at 18.5mm (.728 inches) and measured .734 inches; minimum wall
thickness .040 inches. Barrel measurements for the extra set (U/O): bore diameter nine inches from the breech both proofed and measured 18.6mm (.732 inches); minimum wall thickness .038/.043 inches. Barrel and stock
measurements (U/O): bore diameter nine inches from the breech both proofed and measured at 18.6mm (.732 inches); choke constriction .004/.005 inches; minimum wall thickness .042/.040 inches; 1 7/16 inch drop at comb; 1 7/8
inch drop at heel; 14 5/8 inch length of pull; cast-off 1/2 inch; weight 9 lbs. 14 oz.
CONDITION: Excellent overall, retaining 98% plus original blue finish with a rub at the muzzle, 99% nitride original finish, minor handling evidence, a few minor marks in the wood, and sharp checkering on the stock and forend.
Mechanically excellent. The extra barrels are both also excellent. A great chance to own a set one could do it all with!
Estimate: 9,000 - 14,000
322