Page 426 - 4095-BOOK3

424
LOT 3626
Barret MRAD Sniper Rifle with AAC Titan-QD Silencer,
Schmidt & Bender Scope, and Case, Class III/NFA
-A) Barrett Firearms Mfg. Co. MRAD Bolt Action Sniper
Rifle in .338 Lapua, Serial Number “AJ000740” - Serial no.
AJ000740, 338 Lapua Magnum cal., 26 inch fluted bbl., burnt bronze Cerakote/black finish, metal stock. Designed in 2009 by Chris
Barrett, with this specific rifle being an earlier production example with a serial number of “AJ000740”. Features a free-floated and
straight-fluted heavy profile nitride barrel marked “338 LM 1-9.4” and fitted with a single-chamber muzzle brake, monolithic upper
receiver with an integrated “30/MOA” marked Picatinny rail running across the top, proprietary screw slots
machined into the sides and bottom of
the forend, a lower receiver that accepts
AR-15 pattern pistol grips, and side folding
metal buttstock with adjustable cheek height and length of pull. The left side of the lower receiver bears the
manufacturer’s address, “MULTI-CALIBER” marking, and serial number. Fitted with a Schmidt & Bender 5-25x56 mm PM II
scope on a LaRue Tactical mount, an Atlas folding metal bipod, A2 pattern pistol grip, and three Picatinny rail segments on
the forend. Includes a black Pelican 1750 series hard case fitted for the rifle, a matching numbered Schmidt & Bender scope box,
an extra magazine, and user’s manual.
CONDITION: Excellent overall, retaining 99% original burnt bronze Cerakote and black finishes with limited minor handling evidence overall. Mechanically excellent. The scope is excellent
with crisp, clear optics. The case is very fine. B) Advanced Armament Corp. Titan QD, Class III/NFA Silencer, with Case - Serial no. TIQD04140, 338 Lapua Magnum cal., tan cerakote finish.
Alloy construction, 9 1/2 inches overall, with markings for 338 Lapua Magnum, 300 Winchester Magnum, and 7.62mm. With a Pelican 1170 case and instruction card.
CONDITION: Excellent, 98% plus cerakote finish, showing minimal handling marks. NOTE: This Silencer is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and
Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 479, National Firearms Act.
Estimate: 4,000 - 6,000
LOT 3625
HM Defense & Technology Model HM50B2 .50 BMG
Bolt Action Sniper Rifle with Case and Bipod - Serial
no. 2B0149, 50 BMG cal., 29 1/4 inch heavy round bbl., tungsten grey Cerakote/black finish, metal stock. Released
in December 2022 as a second generation follow up to the earlier HM50B, the HM50B2 is a .50 BMG chambered
bolt action sniper/anti-material rifle produced by HM Defense & Technology in Mount Crab, Ohio, utilizing upper
and lower receiver halves constructed from billet aluminum blended with some AR-pattern features and layouts. Manufactured without iron
sights, featuring Picatinny rails spanning the tops of the upper receiver and ventilated handguard, a three-port muzzle brake on the barrel, a
left-side protruding bolt handle, the manufacturer’s address,
model marking, and serial number on the left of the magazine
well, AR-patterned magazine release and trigger, and a
monolithic milled buttstock. Fitted with an Ergo over-
molded rubber AR-pattern grip, and adjustable plastic cheek
rest, and an adjustable Magpul PRS rubberized buttpad.
Includes an attached milled aluminum bipod and a black hard
case fitted to the rifle with a matching numbered HM Defense
& Technology label and containing a manual.
CONDITION: Excellent overall, retaining 99% original tungsten
grey Cerakote and black finishes with some factory grease
in the action and limited minor handling evidence overall.
Mechanically excellent. The case is very fine.
Estimate: 5,500 - 7,500
LOT 3624
Surgeon Rifles Custom Scalpel LA Bolt Action Precision Rifle in 6.5x284 Norma with Cadex Chassis System - Serial no. L01054B, 6.5x284 Norma cal., 26 inch
round bbl., sniper grey Cerakote/black finish, metal stock. Manufactured in Prague, Oklahoma, without sights. Features a barrel with thread on AWC suppressor mount PSR muzzle brake
with thread protector mated to a Surgeon Scalpel 1086 Long Action receiver, both finished in sniper grey Cerakote. The bolt body is machined with shallow spiral flutes and topped off with a
tactical frag pattern handle, also finished in sniper grey Cerakote. The barreled action is fitted in a black Cadex Defense Dual Strike chassis system, which features a Picatinny rail running across
the top, screw mount interfaces on the sides and bottom of the forend, integrated sling stud at the base of the forend, single-stack AICS magazine pattern trigger housing, Ergo pattern over-mold rubber pistol grip, folding metal
buttstock section with retention latch, bottom Picatinny rail for monopod attachment, adjustable cheek piece, and adjustable butt with Decelerator buttpad.
CONDITION: Excellent overall, retaining 99% plus original sniper grey Cerakote and black finishes with a few minor scratches on the left side chassis body, but otherwise minimal handling evidence. Mechanically excellent.
Estimate: 5,000 - 8,000