Page 307 - 88-BOOK1

LOT 369
Desirable Group Industries HR4332 Class III/NFA Fully Transferable Submachine Gun, with Accessories - Serial no. 101103, 9 mm cal., 10 inch round bbl., matte gray finish, metal stock, plastic grips. Manufactured in the USA in direct emulation of the original IMI Uzi submachine gun, the HR 4332 was among the final generation of fully transferable American machine guns, manufactured shortly before the Firearm Owners Protection Act (aka House Resolution 4332) went into effect making it among the last fully transferable machine guns manufactured in the United States. The receiver is properly without the barrel ring and bolt restrictor block that would normally prevent installation of military configuration components, and the item is currently fitted with a military-contour SMG barrel, a smooth-sided bolt, dense rubber buffer pad, an unmarked receiver cover with ratcheting cocking handle, and a full auto trigger group with “A R S” markings. The left side of the receiver bears both Group Industries and Vector Arms marking. Fitted with a ribbed plastic forearm and grip panel set, and an underfolding steel buttstock. Included with the lot are two extra barrels and bolts (one each in 9mm and 22 LR), eleven 22 LR magazines, thirteen 9mm magazines, an extra ratcheting top cover, loading tool and sling. CONDITION: Excellent, with 90% plus original matte gray finish, showing mild handling and cycling wear on top receiver plate. The furniture is also excellent, with some light scratches. The ratchet safety has been disabled for compatibility with the interior buffer, otherwise mechanically excellent. NOTE: This weapon is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478. Provenance: The Mel Raucher Collection. Estimate: 9,500 - 14,000
LOT 370
Military Armament Corporation M10 Submachine Gun and Silencer Set, Class III/NFA -A) MAC M10, Class III/ NFA Fully Transferable Machine Gun with Accessories - Serial no. 1-3002254, 45 ACP cal., 6 inch round bbl., matte black phosphate finish, synthetic stock. One of the signature weapons of the 20th century, the Ingram M10 (also known as the MAC-10) was sought out by military and paramilitary operators as a potent and concealable close-quarters weapon, in addition to a multitude of appearances in film and television. This particular M10 is addressed to Powder Springs, Georgia. Fixed sights, threaded barrel for a suppressor (see B), safety switch on the lower right of the receiver, selector lever on the left, and three-line address markings below the ejector port. With a black plastic grip extension, nylon web foregrip, and a fixed stock; the non-factory attached/added stock is an early M16/AR15 model installed on an adapter. Includes a Guardforce brand case, wire stock, and magazine loading tool. Magazine absent. CONDITION: Very fine as modified (see above), with 85% of the matte black phosphate finish, showing shallow spotting overall, along with some light wear and handling marks. The grip and stock show minor wear. Mechanically excellent. NOTE: This weapon is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478. B) Military Armament Corp M10 Class III/NFA Silencer - Serial no. S1-4002508, 45 , black finish. The companion piece to the M10 SMG, the M10 silencer uses a combination of a barrel extension ported to exhaust into an expansion chamber and a set of wipes to mitigate sound. 11 1/2 inches overall, alloy construction, with a cloth sleeve. CONDITION: Fine, with 85% plus original black anodized finish, showing mild scratches and wear. The wipes are a bit ragged. NOTE: This Silencer is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478. Estimate: 7,500 - 11,000
LOT 371 RPB Industries Model M11-A1 Machine Pistols, Class III/NFA Fully Transferable Machine Gun - Serial no. 3808871, 380 cal., 5 inch round bbl., matte black finish, metal stock, brass grips. A scaled-down variant of the famous M10 SMG, the M11 made an already compact CQB weapon even more maneuverable. Fixed post and peep sights, with a threaded muzzle, nylon strap front grip mounted to a bracket on the frame, selector switch on left side, safety on right with bolt lock mechanism built into the charging handle, RPB nomenclature, and a telescoping buttstock. Included with the lot is a manual, loading tool, and a faux silencer barrel extension. CONDITION: Excellent, with 95% of the original matte black finish, showing some mild spotting and handling marks. The barrel extension has been modified, with multiple ports cut into the external tube (internal tube unaltered). Mechanically excellent. NOTE: This weapon is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478. Estimate: 6,500 - 9,500
305