Page 437 - 89-FLIPBOOK1

LOT 553
Custom Barrett Model 82A1 Semi-Automatic Rifle with Class III/NFA Silencer -A)
Barrett M82A1 Semi-Automatic .50 BMG Rifle - Serial no. 20218, 50 BMG cal., 21 1/2
inch heavy fluted bbl., matte grey finish, metal stock. Developed in the early 1980s, the M82 series was adopted by a number of military forces where
its powerful chambering and long range capabilities make it useful for a number of tasks from anti-personnel to anti-material. It features standard
Barrett Manufacturing Inc. markings on the left side of the magazine well. The rifle is fitted with a shortened heavy fluted barrel with bolt-on Barrett two
chamber chevron muzzle brake, ventilated steel receiver, 60 slot Picatinny rail running across the top, folding bipod, buttstock mounted monopod, bolt on buttstock grip panels, detachable carry handle, flip up blade front and fully adjustable rear peep sights, and solid rubber recoil pad. The muzzle break has been modified with a mounting end cap for the silencer included with the lot, along with a threaded mounting bracket bolted onto the front of the forend.
CONDITION: Excellent overall, retaining 95% plus matte grey finish with scattered handling marks and scratches near the takedown pins. Mechanically excellent.
B) J.C. Benjamin Class III/NFA Silencer - Serial no. D9A, 88 , stainless finish. Constructed from stainless steel, with a threaded front cap, internal expansion space, and a short section of .88 caliber bore at the end. Marked “JCB INC/PORTLAND OR.” 30 3/4 inches overall, enclosed by the forearm when threaded onto mounting bracket on forend of rifle.
CONDITION: Very fine overall, with faint handling marks. NOTE: This Silencer is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 479, National Firearms Act.
Estimate: 9,500 - 16,000
LOT 554
Knights Manufacturing Co. SR-25 Semi-Automatic Rifle with Class III/
NFA Silencer -A) Knights Manufacturing Co. SR-25 Semi-Automatic
Rifle with Scope - Serial no. 23074, 7.62x51 Nato cal., 28 inch round bbl., matte black/blue finish,
synthetic stock. Manufactured in Vero Beach, Florida, the SR-25 is Knight’s Armament Company’s attempt at building the most accurate 7.62x51 mm NATO rifle possible. The rifle was developed with Eugene Stoner. The upper receiver is numbered to match the lower. It features a custom 30 inch long round handguard, which acts as the mounting face for the included silencer in the lot, surrounding the heavy barrel. Fitted with an A2 style pistol grip and fixed stock. A Harris SL bipod is mounted to the handguard via a 12 inch long mounting bracket on the bottom. Includes a bolt-on polymer cheek riser and Leupold Mark 4 8.5-25x50 mm LR/T scope with lens caps, magazine absent.
CONDITION: Excellent overall, retaining 97% of original matte black and blue finish, with light handling marks. The buttstock has several scratches on the right side. Mechanically excellent. B) J.C. Benjamin Class III/NFA Silencer - Serial no. B10, 51 , stainless/matte black finish. Constructed from stainless steel, with a threaded front cap, internal expansion space, integral spanner wrench interface and threaded mount, along with a short section of .51 caliber bore at the end. Marked “JCB INC/ PORTLAND OR.” 13 1/4 inches overall, enclosed by the forearm when assembled.
CONDITION: Very fine overall, with scattered dings and handling marks. NOTE: This Silencer is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 479, National Firearms Act.
Estimate: 5,000 - 7,500
435