Page 302 - 86-Book3

300
LOT 3516 Blaser Model F16 Sporting Over/Under Shotgun with Case - Serial no. FGR002444, 12 gauge, 30 inch vent rib bbl., gun metal grey finish, walnut stock. Blued steel barrels with single bead sight on the matted vent rib, standard Blaser markings, 2016 dated German proofs, interchangeable chokes (improved cylinder/ improved modified installed), and 76 mm (3 inch) chambers with automatic ejectors. The gun metal grey finished action shows bright “F16” on either side with a plain “Blaser” on the underside and features a single selective trigger and tang mounted manual safety switch. Attractively figured grade V, multi-point checkered forend and pistol grip stock with Blaser rubber recoil pad. Includes a Blaser takedown case, original shipping box, and an extra choke tube (modified). Barrel and stock measurements (U/O): bore diameter nine inches from the breech proved and measured at 18.6mm (.732 inches) and measured .733/.732 inches; minimum wall thickness .030/.030 inches; 1 1/2 inch drop at comb; 2 1/4 inch drop at heel; 14 13/16 inch length of pull; weight 7 lbs 3 oz. CONDITION: Excellent overall, retaining 99% plus original gun metal grey finish with limited handling evidence, and sharp checkering on the wood. Mechanically excellent. Estimate: 3,500 - 5,500
LOT 3517
Factory Bottega C. Giovanelli Engraved Rizzini 28 Gauge Artemis Over/Under Shotgun with Case - Serial no. 105101, 28 gauge, 29 inch vent rib bbl., blue/ casehardened finish, walnut stock. Single brass bead sight on the matted vent rib, standard markings, 2 3/4 inch chambers with automatic ejectors, and interchangeable chokes (improved modified/full installed).
The casehardened sideplated action displays full coverage floral scroll engraving surrounding Rizzini emblems on either side and “ARTEMIS” on the underside as well as “Bottega C. Giovanelli” on the triggerplate. The gun features a single trigger and a manual safety/selector. Beautifully figured, multi-point checkered forend and round
knob pistol grip stock with serrated wood buttplate. Includes the original factory case and three extra chokes (cylinder, improved cylinder, and modified). Stock measurements: 1 1/2 inch drop at comb; 2 1/4
inch drop at heel; 14 3/4 inch length of pull; weight 5 lbs 12 oz.
CONDITION: Excellent overall, retaining 99% plus original blue and casehardened finishes, limited handling evidence, and sharp checkering on the wood. Mechanically excellent. Estimate: 2,500 - 4,500
LOT 3518
Factory Engraved and Gold Inlaid Beretta Model 682 Gold X Trap Mono-Top Shotgun with Extra Barrel Set and Case - Serial no. M68114B, 12 gauge, 34 inch vent rib bbl., blue/matte grey finish, walnut stock. Manufactured in 1998. Dual bead sights on matted vent rib which is marked with a gold “2”, standard markings, 2 3/4” chamber with ejector, and interchangeable chokes (modified installed). The smoke grey finished action displays light scroll engraving with gold inlaid Beretta markings and logo. Single gold trigger and tang mounted safety/selector. Lightly figured, multi-point checkered forend and pistol grip stock with adjustable comb and black rubber recoil pad. Includes an extra set of non-matching 30 inch over/under barrels with 3 inch chambers and interchangeable chokes (improved modified/full installed). Also included is a Beretta takedown case and two extra choke tubes (improved modified and modified). Stock measurements: 1 1/2 inch drop at comb (current); 2 3/8 inch drop at heel; 15 inch length of pull; weight 9 lbs. CONDITION: Excellent overall, retaining 98% plus original blue, gold, and smoke grey finishes, some slight wear/scratching at the muzzle, slight chip at the upper tang, and sharp checkering on the wood. The extra barrel set is excellent. Mechanically excellent. Estimate: 2,500 - 4,000 LOT 3519 Factory Game Scene Engraved Beretta 20 Gauge Model S687 EELL Diamond Pigeon Sporting Over/ Under Shotgun with Case - Serial no. M70399B, 20 gauge, 29 1/2 inch vent rib bbl., matte blue/coin finish, walnut stock. Single steel bead sight on the matted vent rib, 3 inch chambers with automatic ejectors, and interchangeable chokes (improved cylinder/modified installed). The coin finished action displays scroll engraving surrounding a pair of mallards on the left, a trio of woodcocks on the right, and a woodcock on the underside and features a single gold trigger and tang mounted safety/selector. The triggerplate is signed “Bottega C. Giovanelli”. Beautifully figured, multi-point checkered Schnabel forend with engraved fittings and pistol grip stock with checkered wood buttplate. Includes a factory takedown case, four snap caps, and four extra chokes (skeet, improved modified, full, and “2”). Stock measurements: 1 3/8 inch drop at comb; 2 inch drop at heel; 14 9/16 inch length of pull; weight 6 lbs 4 oz. CONDITION: Excellent, retaining 99% original matte blue and coin finishes with some oil staining on the action and minimal minor handling evidence. The wood is very good with repaired break in the wrist, some scattered dings and scratches and sharp checkering. Mechanically excellent. Estimate: 2,000 - 3,500
LOT 3520
Rizzini Model BR110 Sporter Over/ Under Shotgun with Case - Serial no. 116632, 12 gauge, 30 inch vent rib bbl., matte blue finish, walnut stock. Dual bead sights on the matted vent rib, standard markings, 3 inch chambers with automatic ejectors, and interchangeable chokes (cylinder/improved cylinder installed). The matte blued action features “RIZZINI” on either
side, “BR110/Sporter” on the underside, a single trigger, and manual safety/selector. Nicely figured, multi-point checkered forend and pistol grip stock with rubber recoil pad. Includes shipping box, original case, and three extra chokes (modified, improved modified, and full). Stock measurements: 1 3/8 inch drop at comb; 2 1/8 inch drop at heel; 14 9/16 inch length of pull; cast-off; weight 8 lbs 2 oz.
CONDITION: Excellent overall, retaining 99% plus original matte blue, limited handling evidence, and sharp checkering on the wood. Mechanically excellent. Estimate: 1,400 - 2,250