Page 333 - 4095-BOOK2

331
LOT 1340
RPB/MAC M10 Submachine Gun and Silencer Combo, Class III/
NFA -A) RPB/MAC M10 Submachine Gun, Class III/NFA Fully Transferable Machine
Gun - Serial no. C261, 45 ACP cal., 6 inch round bbl., matte black phosphate finish, metal stock. Manufactured before 1982. One of the signature
weapons of the 20th century, the Ingram M10 (also known as the MAC-10) was sought out by military and paramilitary operators as a potent and concealable close-
quarters weapon. Post and peep sights. The left side of the receiver bears the RPB address and the selector switch, the MAC Powder Springs address on the right, and the safety
switch on the underside. Fitted with a swiveling nylon strap front grip, a plastic grip extension, and two-position telescoping buttstock. Magazine absent.
CONDITION: Excellent, with 95% of the original phosphate finish, with mild wear and spotting on the blued barrel and some thinning and handling marks on the matte black
components. The grip extension is excellent. Mechanically excellent. NOTE: This weapon is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of
Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 479. B) Military Armament Corp M10 Class III/NFA Silencer - Serial no.
S1-2000883, 45 cal., black anodized finish. The companion piece to the M10 SMG, the M10 silencer uses a combination of a barrel extension ported to exhaust
into a pair of expansion chambers and a wipe module to mitigate sound. 11 1/2 inches overall, alloy construction, with a foam heat shield around the body.
CONDITION: Excellent, with 95% original black anodized finish, showing mild external wear. Some of the markings are double struck, and the wipes are absent.
NOTE: This Silencer is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives,
(BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 479, National Firearms Act.
Estimate: 7,500 - 11,000
LOT 1339
S&H/Fabrique Nationale FNC Sear/Host Combo,
Class III/NFA -A) S&H Arms FNC Auto Sear, Class III/NFA Fully Transferable Machine Gun - Serial no. 2728, 223 cal..
Manufactured in Tulsa, Oklahoma, this S&H Arms sear unit has been installed in the host gun described in item “B” in this
lot, along with a working set of safe, semi-automatic, three-round burst, and full automatic internals. The sear is individually
numbered, with the number and the S&H address also applied to the interior of the lower receiver of item “B.”
CONDITION: Excellent, with minor handling marks. NOTE: This weapon is a National Firearms Act (NFA), fully transferable Class 3, which is registered with
the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 479.
B) Fabrique Nationale FNC Host Gun - Serial no. F.N.034746, 223 Rem cal., 16 inch round bbl., matte black finish, synthetic stock. Introduced in 1979 as a
commercial semi-automatic and manufactured in Belgium prior to 1989, this FNC rifle currently hosts the auto sear described in item “A” of this lot. Developed
in the 1970s as a competitor to the American M16, the FNC would be adopted by multiple nations as the successor to FN’s own FAL rifle at the tail end of the Cold War, and still serves as the main-line infantry rifle for multiple
NATO and non-NATO nations. Features elevation adjustable post front and two-leaf windage adjustable peep rear sights, with a ported flash hider and sling swivel on the barrel, flip-up grenade sight on the gas block, ribbed and
ventilated metal and plastic forearm, smooth pistol grip, and a synthetic buttstock. The lower receiver is fitted with a right handed selector switch with “S/1/3/A” markings, and the bolt carrier is a semi-automatic unit modified to
engage the sear. Import marked on left side of the upper receiver. Magazine absent.
CONDITION: Very fine as upgraded to selective fire, with 95% of the factory quality matte black finish, showing some flaking on the barrel, light scratches on the furniture, and mild handling marks overall. Mechanically excellent.
NOTE: This item is a “host” for a NFA-registered conversion component, and will not be separated from that component for sale or shipment. The serial numbered lower receiver of this item has been permanently altered to accept
the conversion component, and is called out by serial number on the paperwork for the conversion component.
Estimate: 15,000 - 22,500