Page 241 - 89-FLIPBOOK3

LOT 3352
Group Industries UZI Full Auto Bolt in a Norinco Model 320
Host Gun
-A) Group Industries Conversion Bolt, Class III/NFA Fully Transferable Machine Gun - Serial no.
B0041, 9 mm , matte gray phosphate finish. Manufactured by Group Industries prior to the 1986 cutoff on machine gun registration, this UZI bolt is a registered transferable machine gun in its own right, with address
and serial number markings on the left side. The right side of the bolt and recoil spring guide are slotted to pass around a semi-automatic restrictor block, allowing a semi-auto UZI to act as a host without heavy modification.
CONDITION: Very fine, with 85% plus matte gray phosphate finish, showing some light cycling wear. NOTE: This weapon is a National Firearms Act (NFA), fully transferable Class 3, which is
registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 479.
B) Norinco Model 320 Carbine, Host Gun - Serial no. MSA05494, 9 mm cal., 16 inch round bbl., matte grey finish, metal stock. Manufactured in China and imported by A.C.C./Intrac, this
Model 320 carbine acts as a host for the Group Industries bolt. Adjustable post front and two-leaf peep rear sights, with the partially ground seven-pointed star on the left side and the
manufacturer and import marks on the right. A ratcheting top cover and a full auto grip assembly (with plain English “A F S” selector marks added above the original Israeli marks) are installed, with
a semi-auto style bolt block and barrel restrictor ring present, and no bayonet lug. With a set of green painted forearm and grips, and a folding buttstock marked “280” in silver paint. Included with the lot are two extra magazines, sling, cleaning tools, an extra barrel (10 1/4”, shortened from a carbine-length barrel and shaped for the restrictor ring), and a generic case.
CONDITION: Fine, with 95% plus refinished matte gray phosphate, showing light handling marks overall. Evidence of welding is present on the frame around the bolt restrictor block, suggesting a past repair. The forearm and grips are very good, with mild scuffing and paint loss.
Mechanically excellent.
Estimate: 9,000 - 14,000
LOT 3353
SWD M11/Nine Submachine Gun and Silencer Class III/NFA
-A) SWD M11/Nine, Class III/NFA Fully Transferable Machine Gun - Serial no. 86-0005434, 9 mm cal., 5
1/2 inch round bbl., grey phosphate finish, metal stock. A descendant of Ingram’s M10, the M11/Nine is made with
a slightly longer receiver than the M11 to accommodate a caliber upgrade from 380 ACP to 9mm Parabellum and allow for a longer range of bolt travel to dampen felt recoil. Fixed blade and peep sights, with the “SEMI/SMG” selector
switch on the left side of the frame, safety switch next to the trigger guard and standard markings on the right side of the frame. With a contoured grip with the Cobray logo on the back and a telescoping wire stock. Included with the item is a barrel extension. Magazine absent.
CONDITION: Excellent, with 95% plus gray phosphate finish, showing some areas of brown patina, mild handling/cycling marks and scattered light scratches. Mechanically excellent. NOTE: This weapon is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 479.
B) SWD M11 Silencer, Class III/NFA Silencer - Serial no. N516, 9 mm , matte black finish. 11 1/2 inches in overall length, with a combination of a ported gas chamber, baffles and a wipe assembly for sound moderation. CONDITION: Very fine, with mild handling marks and a small amount of spotting. Some minor chipping is visible on the wipes, which otherwise appear solid. NOTE: This Silencer is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 479, National Firearms Act.
Estimate: 7,500 - 11,000
LOT 3354
RPB/MAC M10 Submachine Gun, Class III/NFA Fully Transferable Machine Gun with Two Extra Upper Assemblies and Accessories - Serial no.
C564, 45 Auto cal., 6 inch round bbl., blue finish, metal grips. One of the signature weapons of the 20th century, the Ingram M10 (also known as the MAC-10) was sought out by military and paramilitary operators as a potent and concealable close-quarters weapon. Post and peep sights, with yellow and white paint applied to the sights and the charging handle. The left side of the receiver bears the RPB address and the selector switch, the MAC Powder Springs address on the right, and the safety switch on the underside. A plastic grip extension is installed, as is a canvas strap front grip and a two-position steel telescoping stock. Includes two extra matte gray upper slide/barrel/bolt assemblies (one of the two has a driving spring and buffer), a Cobray canvas soft case, nine extra magazines (two appear to be approximately 50-round, one 40-round, seven 30-round), screw-on barrel extension, two walnut buttstocks, magazine loading tool, an assortment of M10 manuals, related magazine articles and price catalogs, and a World War II era canvas pouch marked
“TOOL ROLL M10” containing tools.
CONDITION: Very fine, retains 90% refinished high polish blue finish with some light edge wear, and partially removed/polished markings on the left. Mechanically excellent. The included accessories are also very fine. NOTE: This weapon is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 479. Estimate: 5,500 - 8,500
239