Page 286 - 86-Book2
P. 286
LOT 1352
Abercrombie & Fitch Marked Factory Engraved Perazzi Lusso Over/Under Shotgun with Case and Barrel Inserts - Serial no. 30543, 12 gauge, 28 inch vent rib bbl., blue/coin finish, walnut stock. Manufactured in 1967. Blued steel barrels with dual bead sights on the matted vent rib, “MANIFATTURA ARMI PERAZZI BRESCIA - ITALY” and “ABERCROMBIE & FITCH” on the left and right of the breech respectively, chokes marked “***”/”*” (modified/ full), and chambers with automatic ejectors. The muzzles have both been threaded for Briley chokes as well as being currently fitted with 20 gauge full length inserts with interchangeable chokes. The coin finished action features attractive rose and scroll engraving with scrolling borders and features a single trigger and tang mounted manual safety switch. Beautifully figured, multi-point checkered forend with engraved fittings and pistol grip stock with an added black rubber Kick-Eez recoil pad. Includes an Americase takedown case and three extra 12 gauge chokes. Stock measurements: 1 7/16 inch drop at comb; 2
inch drop at heel; 14 7/8 inch length of pull; weight 8 lbs 15 oz. CONDITION: Excellent overall, retaining 98% original blue and coin finishes, with some areas of discoloration, minor handling evidence, a few light pressure marks in the wood, and sharp checkering on the stock and forend. Mechanically excellent.
Estimate: 6,000 - 9,000
284
LOT 1353 Factory Engraved Krieghoff Model K-80 Over/Under Shotgun Two Barrel Set with Case - Serial no. 13769, 12 gauge, 30 inch vent rib bbl., blue/coin finish, walnut stock. Blued steel barrels with dual sights on the matted vent rib, standard Krieghoff markings, 1995 dated German proofs, interchangeable choke system (“0”/”0” installed), and 76 mm (3 inch) chambers with automatic ejectors. The coin finished action displays beautiful scroll engraving with a tasteful use of negative space and marked “K80/SHOTGUNS/ of ULM/Ulm W.-Germany” on the underside. The gun features a single selective trigger and a tang mounted manual safety switch. Beautifully figured, multi-point checkered forend with engraved fittings, including the Deeley style release, and pistol grip stock with right hand palm swell and Decelerator recoil pad. Includes an extra matching set of 28 inch 20 gauge barrels numbered “13769-1” with added interchangeable chokes and 3 inch chambers. Also included is a factory takedown case and five extra choke tubes (1,1,2,3, and 4). Barrel measurements for the two gauge set (U/O): bore diameter nine inches from the breech both proved at 15.7mm (.618 inches)
and measured .621/.622 inches; minimum wall thickness .046/.045 inches. Barrel and stock measurements for the 12 gauge set (U/O): bore diameter nine inches from the breech both proved at 18.6mm (.732 inches) and measured .735/.732 inches; minimum wall thickness .035/.038 inches; 1 3/8 inch drop at comb; 1 13/16 inch drop at heel; 13 9/16 inch length of pull; weight 8 lbs 8 oz. CONDITION: Excellent, retaining 99% original blue and coin finishes with limited handling evidence. There is a light surface chip at the left rear of the forend, otherwise the wood is very fine with scattered minor handling marks and sharp checkering. The extra barrel is excellent. Mechanically excellent. Estimate: 6,000 - 9,000
LOT 1354 Blaser Model F3 Competition Over/Under Shotgun with Case - Serial no. J08297, 12 gauge, 32 inch vent rib bbl., blue/gun metal grey finish,
walnut stock. Blued steel barrels with high visibility orange front sight on the matted vent rib, 2005 dated German proofs, 76mm (3 inch) chambers, and interchangeable chokes (skeet/improved cylinder installed). The gun metal grey finished action is marked with a simple “F3” on either side and “Blaser” on the underside. The gun features an adjustable single selective trigger, bushed firing pin plate, and tang mounted manual safety switch. Beautifully figured, multi-point checkered Schnabel forend and pistol grip stock with right hand palm swell, adjustable comb, and adjustable buttplate with Kick-Eez
recoil pad. Includes a factory takedown case and three extra choke tubes (modified, improved modified, and full). Barrel and stock measurements (U/O): bore diameter nine inches from the breech both proved and measured at 18.6mm (.732 inches); minimum wall thickness 028/.031 inches; 1 1/2 inch drop at comb; 1 13/16 inch drop at heel; 14 9/16 inch length of pull; weight 8 lbs 8 oz.
CONDITION: Excellent overall, retaining 99% original blue and gun metal grey finishes with limited minor handling evidence and sharp forend and stock checkering. Mechanically excellent. Estimate: 4,000 - 7,000